Skip to main content
Siemens 3RK3111-1AA10

Siemens 3RK3111-1AA10 SIRIUS Safety Central Unit, 4/8 F-DI,

MPN 3RK3111-1AA10
NRND

Siemens SIRIUS modular safety system central unit, 3RK3111-1AA10, 4/8 F-DI, 1 F-RO, 1 F-DO, SIL CL 3, IP20, snap-on DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RK3111-1AA10 specifications
ParameterValue
IP ratingIP20
Depth124 mm
Width45 mm
Height111 mm
Input delay time0 ... 150 ms

Product details

The Siemens 3RK3111-1AA10 is a SIRIUS modular safety system central unit — the brain of a distributed safety setup. It gives you 4 or 8 fail-safe digital inputs (F-DI), one fail-safe relay output (F-RO), and one fail-safe digital output (F-DO), all rated SIL CL 3 per IEC 61508 and SIL 3 per IEC 62061. That means it's built for guarding hazardous motion on a machine cell — think press brakes, robot cells, or conveyor zones where a fault has to land the machine in a safe state, not just trip a general alarm. The inputs are parameterizable, so you can set them as single-channel or 2-channel depending on the sensor type — light curtains, E-stops, interlock switches. The 2-channel safety circuits (up to 8 safety-related circuits) let you wire dual-channel E-stop or guard-door chains without external contactors. Input delay is adjustable from 0 to 150 ms, which helps tune out nuisance trips from vibration on a punch press or a conveyor stop. Snap it onto DIN rail or screw-mount it with the push-in lug. Mounting position is vertical only. It draws 24 V DC, and the terminal block accepts 2 x 20-14 AWG solid or stranded wire. At 24 V the response time is 1 ms — fast enough for most safety applications, but watch the input delay setting if you need a quicker trip.

Deployment Context

Pop this into a panel where you need safety I/O distributed near the hazard rather than running every wire back to a central safety PLC. The IP20 enclosure means it lives inside a cabinet — not on the machine frame. It supports PROFIBUS DP when paired with the DP interface module, cycling 32 bits of data. That lets the safety CPU talk to a higher-level controller without hardwiring every status bit. Valve monitoring and monitored start-up are built in — handy for verifying a pneumatic valve has returned to its safe position before the cycle restarts.

MPN
3RK3111-1AA10