Skip to main content
Siemens 3RN2010-1CW30

Siemens 3RN2010-1CW30 SIRIUS Thermistor Motor Protection Rel

MPN 3RN2010-1CW30
Active

Siemens SIRIUS 3RN2 thermistor motor protection relay, 3RN2010-1CW30, 24-240 V AC/DC supply, 17.5 mm wide, IP20, LED display.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RN2010-1CW30 specifications
ParameterValue
IP ratingIP20
Depth90 mm
Width17.5 mm
Height100 mm

Product details

The Siemens 3RN2010-1CW30 is a SIRIUS 3RN2 thermistor motor protection relay — a compact evaluation unit that works with PTC thermistor sensors embedded in motor windings. It's designed to trip when the motor exceeds safe temperature, protecting against overload or cooling failure. The supply is rated 24-240 V AC/DC (50/60 Hz), so it fits both standard control voltages without needing a separate power supply. Output contacts are rated 1 A at 24 V, 0.2 A at 125 V, and 0.1 A at 250 V — these are dry switching levels for signaling to a PLC or contactor coil, not for direct motor loads. The unit auto-resets after the fault clears, which keeps a line restart automatic unless you wire the reset externally. There's no error memory, so a momentary power loss clears the trip state. It snaps onto 35 mm DIN rail (screw and snap-on) and measures 17.5 mm wide × 100 mm high × 90 mm deep — one standard module width.

Wiring & Mounting Notes

Terminals accept solid wire 20-12 AWG (1x or 2x 20-14 AWG for solid) and stranded 20-12 AWG. No clearance needed above, below, or to the sides (0 mm each direction), so you can pack modules tight on the rail. The LED display gives a quick visual on trip status without a multimeter.

MPN
3RN2010-1CW30