Skip to main content
Siemens 3RN2011-1BW30

Siemens 3RN2011-1BW30 SIRIUS Thermistor Motor Protection Rel

MPN 3RN2011-1BW30
Active

Siemens SIRIUS 3RN2 thermistor motor protection relay, 3RN2011-1BW30, 24...240 V AC/DC, MTBF 97 a, MTTFd 303 a, 22.5 mm wide, screw and snap-on mounting on 35 mm DIN rail.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RN2011-1BW30 specifications
ParameterValue
IP ratingIP20
Depth90 mm
Width22.5 mm
Height100 mm

Product details

Reliability and duty-cycle profile

The 3RN2011-1BW30 is a SIRIUS 3RN2 standard evaluation unit for thermistor motor protection, with ATEX approval and built-in open-circuit and short-circuit detection in the sensor circuit. Its MTBF of 97 a and MTTFd of 303 a give a quantified reliability picture for a motor protection relay that sits in the control circuit, not the power path — the failure mode is loss of thermal monitoring, not a motor fault, but the consequence is unplanned downtime if the relay fails to trip on an over-temperature event. Rated supply is 24...240 V AC/DC, covering most common control voltages without needing a separate transformer tap. The relay operates over -25 to +60 °C ambient and stores down to -40 °C — the storage range governs handling during shutdowns, not running conditions.

Integration and mounting constraints

Width is 22.5 mm, height 100 mm, depth 90 mm. No spacing required in any direction — upwards, downwards, forwards, backwards, and at the side all specify 0 mm clearance. That means it can be packed tight in a crowded DIN-rail row without derating for airflow. Terminals accept solid and stranded conductors 20...12 AWG (1x 20...12, 2x 20...14 for solid). The connector pitch is standard for 22.5 mm housings; strip length is typical for spring-cage or screw terminals on this class of relay.

MPN
3RN2011-1BW30