Skip to main content
Siemens 3RS7005-1KE00

Siemens 3RS7005-1KE00 SIRIUS Signal Converter, 6.2 mm, 0.29

MPN 3RS7005-1KE00
Active

Siemens SIRIUS 3RS7005-1KE00 multi-range signal converter, active switchable design, 6.2 mm wide, 0.29 W, IP20.

$398.56 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RS7005-1KE00 specifications
ParameterValue
Input voltage30 V
IP ratingIP20
MountingSnap-on Mounting
Depth72.5 mm
Width6.2 mm
Height93 mm
Channels1

Product details

The Siemens 3RS7005-1KE00 is a SIRIUS multi-range signal converter — an active, switchable module that takes an analog input (0...10 V, 0...20 mA, or 4...20 mA) and converts it to a frequency output (0...50 Hz, 0...100 Hz, 0...1 kHz, or 0...10 kHz). This is the part you spec when a PLC analog output needs to drive a frequency-sensitive load — a small VFD reference, a pulse-input counter, or a rate meter. The 0.1 % relative metering precision and 0.05 % linearity deviation mean the output tracks the input tightly; the 0.015 %/°C temperature drift keeps it stable across a panel that warms up over a shift.

Snap-on mounting onto standard DIN rail. At 6.2 mm wide and 93 mm tall, it takes up minimal real estate — you can pack a dozen of these in the space of a single contactor. Depth of 72.5 mm leaves clearance for wiring in a standard 80 mm deep enclosure. The IP20 protection class means it's for inside the panel only, not for washdown or outdoor.

The 0.29 W consumed active power is negligible — no thermal derating needed even in a densely packed row of converters. The AC/DC input voltage type (30 V nominal) means it works on either supply without a jumper change. Galvanic isolation between input and output is present, so you can break ground loops between a 4-20 mA transmitter and a PLC input card. The 1-channel design keeps it simple: one signal in, one frequency out, no configuration software needed.

MPN
3RS7005-1KE00