Skip to main content
Siemens 3RS7025-2FW00

Siemens 3RS7025-2FW00 SIRIUS Signal Converter, 24-240 V AC/D

MPN 3RS7025-2FW00
Active

Siemens SIRIUS 3RS7025-2FW00 multi-range signal converter, active switchable, 1 channel, 24-240 V AC/DC, inputs 0-10 V / 0-20 mA / 4-20 mA, IP20, snap-on mounting.

$657.20 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RS7025-2FW00 specifications
ParameterValue
Input voltage30 V
IP ratingIP20
MountingSnap-on Mounting
Depth75 mm
Width17.5 mm
Height93 mm
Channels1

Product details

The Siemens 3RS7025-2FW00 is a SIRIUS multi-range signal converter — one channel, active, switchable, with a manual/automatic setting and a potentiometer for adjustment. It accepts 0-10 V, 0-20 mA, or 4-20 mA input signals and outputs a scaled version, with galvanic isolation between input and output. That isolation means you can run it between a noisy field sensor and a PLC analog card without ground-loop headaches — a real time-saver on a retrofit. Supply voltage is 24-240 V AC/DC, so it works on pretty much any control voltage you find in a panel — 24 VDC, 120 VAC, 230 VAC — no separate supply module needed. Rated at 50/60 Hz, the input range covers the standard line frequencies. Draws only 0.5 W active power, so it won't heat up a crowded DIN rail. Height is 93 mm, depth 75 mm. No clearance needed above, below, or to the sides, so you can pack it tight in a panel.

What the ratings mean in practice

The 6 ms rise time tells you this converter responds fast enough for most process signals — level transmitters, pressure transducers, flow meters — but it's not a high-speed pulse counter. The 30 Hz limit frequency confirms it's for DC or slow AC signals, not encoder or tach pulses. That's standard for a control cabinet — it'll survive a hot summer day inside a non-climate-controlled panel, but don't mount it right above a steam line. Maximum voltage ripple on the supply is 20 mV — tight enough for a clean 24 VDC bus. If your panel has a switching supply with high ripple, you might need a small filter cap before this converter.

No broker scavenger hunt needed.

MPN
3RS7025-2FW00