Skip to main content
Siemens 3RW3017-1BB14

Siemens 3RW3017-1BB14 SIRIUS Soft Starter, 12.5 A, Size S00

MPN 3RW3017-1BB14
Active

Siemens SIRIUS soft starter, 3RW3017-1BB14, Size S00, 12.5 A at 40°C, 110-230 VDC control, integrated bypass, screw and snap-on mounting.

$207.04 – $240.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW3017-1BB14 specifications
ParameterValue
Mountingscrew and snap-on mounting
Depth150 mm
Width45 mm
Height95 mm

Product details

The Siemens 3RW3017-1BB14 is a SIRIUS soft starter in the Size S00 frame, rated 12.5 A at 40°C with a 110-230 VDC control supply. It includes an integrated bypass contactor, so once the motor reaches full speed the thyristors are shorted out — that eliminates heat dissipation from the power semiconductors during run and keeps the panel temperature rise under control.

That 1.5 A drop between 40 and 60 °C is about 12% — plan your panel layout so the soft starter isn't stacked directly above a heat source like a braking resistor or a drive. The minimum load is 10% of the rated current, so it handles small motors down to about 1.25 A without needing a dummy load.

Mounting position is vertical with ±10° tilt front-to-back and side-to-side. Clearance above the device is 60 mm, below is 40 mm, and 15 mm at the sides — that's the free-air space needed for the thyristor heat sink to work. The screw and snap-on mounting means you can clip it onto a DIN rail for initial placement, then screw it down for vibration resistance in a machine-tool panel.

Wiring and connections

Main current circuit terminals are screw-type, accepting 2x (0.25... 2.5 mm²) solid or stranded. Auxiliary and control circuit terminals are also screw-type, for 2x (20... 14 AWG). The front clamping point accepts 2x (16... 10 AWG). Maximum wire length to the motor is 300 m — beyond that, capacitive charging current from long cable runs can cause nuisance tripping on the soft starter's internal protection.

MPN
3RW3017-1BB14