Skip to main content
Siemens 3RW4446-6BC36

Siemens 3RW4446-6BC36 SIRIUS Soft Starter, 617 A at 40 °C

MPN 3RW4446-6BC36

Siemens SIRIUS 3RW4446-6BC36 soft starter, 617 A at 40 °C, 690 V insulation voltage, 50/60 Hz, thyristor-based, inside-delta circuit capable, screw fixing.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW4446-6BC36 specifications
ParameterValue
Mountingscrew fixing
Depth298 mm
Width210 mm
Height230 mm

Product details

617 A at 40 °C — the rating that matters for motor starting

The 3RW4446-6BC36: That 40 °C figure is the baseline for sizing — if your panel ambient runs hotter, the continuous current drops by about 12 % per 10 °C rise, so a motor pulling 500 A FLA needs the 50 °C column, not the 40 °C one. Insulation voltage is rated 690 V, operating frequency 50/60 Hz. The thyristor-based switching handles the inrush without mechanical contact wear — the soft starter ramps voltage to the motor, not slamming contacts closed.

Inside-delta wiring and main circuit connections

This unit supports inside-delta circuit configuration, which lets you wire the soft starter inside the motor delta connection — reduces the current the soft starter sees by a factor of √3 compared to in-line wiring. That means a 617 A rated unit can handle a motor with a line current up to about 1070 A when wired inside-delta, assuming the motor windings are accessible. Main circuit termination accepts stranded 70–240 mm², finely stranded 50–240 mm², or busbar connection. For North American builds, the clamping points accept 2/0–500 kcmil using both points, with the front point handling 3/0–600 kcmil and the back point 250–500 kcmil. That covers everything from a 200 A feeder to a 600 A motor circuit without adapters.

Mounting and panel fit — 298 mm deep, screw-fixed

Dimensions are 298 mm deep, 210 mm wide, 230 mm high. Mounting position allows vertical surface with ±90° rotation and ±22.5° tilt front/back, giving flexibility in tight enclosures. Clearance requirements: 100 mm upwards, 75 mm downwards, 5 mm at the sides. The 5 mm side gap is tight — adjacent devices or cable ducts need to stay clear of the heatsink fins.

Active production — sourcing reality

Sourced through independent distribution channels. No stock-holding claim — quoted to order per RFQ.

MPN
3RW4446-6BC36