Skip to main content
Siemens 3RW5073-2AB15

Siemens 3RW5073-2AB15 Soft Starter, 100 A Min, ATEX, Active

MPN 3RW5073-2AB15
Active

Siemens 3RW5073-2AB15 hybrid soft starter, 100 A minimum, 200-600 V rated, ATEX/IECEx, trip class 10A/10E/20E, PROFIBUS/Modbus/EtherNet/IP, 282 mm depth.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5073-2AB15 specifications
ParameterValue
Mountingscrew fixing
Depth282 mm
Width160 mm
Height230 mm
Trip classCLASS 10 A / 10E (preset) / 20E; acc. to IEC 60947-4-2
Service factor1
Digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

ATEX-rated soft starter for hazardous-area motor control

The Siemens 3RW5073-2AB15 is a hybrid switching device rated for soft starting motors in ATEX-classified zones, carrying both ATEX and IECEx certification. This means it can be specified into Ex-rated installations without an additional isolation barrier — the starter itself is the certified interface between the supply and the motor in a potentially explosive atmosphere. Minimum operating current is 100 A, with a rated voltage range of 200 to 600 V, covering standard low-voltage motor networks globally. The trip class is selectable between CLASS 10A, 10E (preset), and 20E per IEC 60947-4-2 — choose 10A for standard motor protection, 10E for electronic overload relay coordination, or 20E for high-inertia loads that need a longer acceleration window before tripping.

Fieldbus suite and control flexibility

Onboard communications include PROFIBUS, Modbus RTU, Modbus TCP, and EtherNet/IP, so it drops into most industrial networks without a separate gateway. PROFIenergy support is available when paired with the PROFINET standard communication module — useful for energy-aware production lines that power down motors during idle shifts. The analog output is configurable as 4-20 mA or 0-10 V via the High Feature HMI, giving the controls engineer a live current or voltage signal proportional to motor load for trending or SCADA integration. Remote reset is achieved by cycling the control supply voltage — no field visit required after a trip.

Mounting and environmental limits

Mounting is screw-fixing with a vertical surface orientation; the unit can be rotated ±90° or tilted ±22.5° forward and back, so it fits into panels where the DIN rail is already populated. Clearance requirements are 100 mm upward, 10 mm forward, 0 mm backward, 75 mm downward, and 5 mm at the sides — plan the enclosure layout around these gaps for airflow and wiring access. Shock resistance is 15 g for 11 ms, or 12 g if potential contact lifting is a concern, which covers most industrial vibration profiles from conveyors to compressors.

MPN
3RW5073-2AB15