Skip to main content
Siemens 3RW5243-6TC04

Siemens 3RW5243-6TC04 SIRIUS Soft Starter, 90 A Min

MPN 3RW5243-6TC04
Active

Siemens SIRIUS 3RW5243-6TC04 soft starter, 90 A min motor current, 200-480 V input, Class 10A/10E/20E trip, Modbus TCP/PROFIBUS/EtherNet/IP, screw-fix mount, 393 x 210 x 203 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5243-6TC04 specifications
ParameterValue
Mountingscrew fixing
Depth203 mm
Width210 mm
Height393 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1
Digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

90 A minimum, 200-480 V — the motor current floor decides fit

The Siemens 3RW5243-6TC04 is a SIRIUS hybrid soft starter with a minimum settable motor current of 90 A. The input voltage range spans 200 to 480 V. Trip class is configurable: default Class 10A for standard starts, or Class 10E and 20E for higher-inertia loads like centrifuges or long conveyors. That flexibility keeps the starter from nuisance-tripping on a heavy ramp-up while still protecting the motor per IEC 60947-4-2.

Fieldbus fit: Modbus TCP, PROFIBUS, EtherNet/IP — pick your network

This soft starter ships with onboard support for Modbus RTU, Modbus TCP, PROFIBUS, and EtherNet/IP — no option card needed for those four. It also carries PROFINET standard and PROFIenergy capability when paired with the PROFINET communication module. That means it drops into a Siemens-centric line or a mixed-vendor control architecture without a gateway. Clearance requirements: 100 mm above, 75 mm below, 10 mm forward, 5 mm at the sides, 0 mm backward. The 393 x 210 x 203 mm envelope means it fits in a standard 800 mm enclosure with room for a main disconnect above.

Active production — no end-of-life watch needed

Shock resistance is 15 g / 11 ms, with potential contact lifting at 12 g / 11 ms — relevant if the panel is mounted on a vibrating pump skid or near a reciprocating compressor.

MPN
3RW5243-6TC04