Skip to main content
Siemens 3RW5244-6TC05

Siemens 3RW5244-6TC05 SIRIUS Soft Starter, 100 A, 200-600 V

MPN 3RW5244-6TC05
Active

Siemens SIRIUS 3RW5244-6TC05 soft starter, 100 A minimum, rated voltage 200-600 V, Trip Class 10A (default), with PROFIBUS, Modbus TCP, EtherNet/IP, and PROFINET communication.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5244-6TC05 specifications
ParameterValue
Mountingscrew fixing
Depth203 mm
Width210 mm
Height393 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1
Digital output version2 normally-open contacts (NO) / 1 changeover contact (CO)

Product details

100 A minimum, Trip Class 10A — motor protection across the start cycle

The Siemens 3RW5244-6TC05 SIRIUS soft starter is rated for a minimum motor current of 100 A and a rated voltage range of 200 to 600 V. Its default Trip Class 10A (per IEC 60947-4-2) means it will trip within 10 seconds at 7.2× rated current — matching the acceleration profile of standard induction motors driving pumps, fans, and conveyors without nuisance tripping. The unit also accepts Class 10E and 20E settings for longer ramp times or higher-inertia loads.

Multi-protocol fieldbus — PROFIBUS, Modbus TCP, EtherNet/IP, PROFINET

This soft starter integrates directly into modern automation architectures with onboard support for PROFIBUS, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET. The PROFINET interface also carries PROFIenergy capability for coordinated energy management during idle phases. No separate gateway module is required for these protocols — the communication interface is built into the unit, reducing panel wiring and commissioning steps.

Mounting and environmental — screw-fixed, rotatable, derated above 40 °C

Mounting is by screw fixing on a vertical surface, with the unit rotatable ±90° and tiltable ±22.5° front-to-back for tight enclosure layouts. Clearance requirements: 100 mm upward, 75 mm downward, 10 mm forward, 5 mm at the sides, 0 mm backward. Shock resistance is 15 g / 11 ms (12 g / 11 ms with potential contact lifting).

MPN
3RW5244-6TC05