Skip to main content
Siemens 3RW5246-6AC15

Siemens 3RW5246-6AC15 SIRIUS Soft Starter, 160 A, 200-600 V

MPN 3RW5246-6AC15
Active

Siemens SIRIUS 3RW5246-6AC15 soft starter, 160 A minimum, 200-600 V rated voltage, Class 10A/10E/20E trip class per IEC 60947-4-2, screw fixing, 393 x 210 x 203 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3RW5246-6AC15 specifications
ParameterValue
Mountingscrew fixing
Depth203 mm
Width210 mm
Height393 mm
Trip classCLASS 10 A (default) / 10E / 20E; acc. to IEC 60947-4-2
Service factor1

Product details

Sizing a SIRIUS soft starter for motor starting duty

The 3RW5246-6AC15: Trip class is selectable between CLASS 10A (default), 10E, or 20E per IEC 60947-4-2 — this sets the maximum allowable starting time before the soft starter's internal overload trips, so match it to the motor's acceleration profile and load inertia.

Fieldbus and control integration

The soft starter supports PROFIBUS, Modbus RTU, Modbus TCP, EtherNet/IP, and PROFINET standard communication — pick the network your PLC speaks; the PROFINET variant also enables PROFIenergy for coordinated energy management during idle phases. An analog output is configurable as 4-20 mA (default) or 0-10 V (parameterizable with the High Feature HMI accessory) — useful for feeding motor current or load status to a remote display or SCADA input. Firmware updates are supported, and an error logbook is available but only in conjunction with special accessories — plan for this during commissioning if fault history tracking is required.

Mounting and panel layout constraints

Fastening is by screw fixing; the unit measures 393 mm high, 210 mm wide, and 203 mm deep — verify the backplate layout and enclosure depth before cutting the gland plate. Mounting position is flexible: vertical mounting surface with +/-90° rotation and +/-22.5° tilt front-to-back — but the specified clearances must be observed: 100 mm upwards, 75 mm downwards, 10 mm forwards, 5 mm sideways, and 0 mm backwards. Shock resistance is 15 g / 11 ms, dropping to 12 g / 11 ms if potential contact lifting is a concern — relevant for mobile equipment or panels near rotating machinery.

Compliance and approvals across jurisdictions

The 3RW5246-6AC15 carries CE marking, UL approval, and CSA approval — accepted in European, US, and Canadian installations without additional certification work.

MPN
3RW5246-6AC15