Skip to main content
Siemens 3UG4625-2CW30

Siemens 3UG4625-2CW30 SIRIUS Residual Current Monitoring Rel

MPN 3UG4625-2CW30
NRND

Siemens SIRIUS 3UG4625-2CW30 residual current monitoring relay with digital setting, 30 mA … 40 A measuring range, 24 … 240 V AC/DC supply, IP20.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3UG4625-2CW30 specifications
ParameterValue
IP ratingIP20
Depth91 mm
Width22.5 mm
Height103 mm
Adjustable response delay time0 ... 20 s
Adjustable operating delay time0.1 ... 20 s
Adjustable response delay time when starting0.1 ... 20 s

Product details

The Siemens 3UG4625-2CW30 is a SIRIUS residual current monitoring relay with digital setting, designed for three-phase supplies. It measures residual current from 30 mA up to 40 A, with a measurable current range of 10 mA to 43 A — so it covers both sensitive ground-fault detection (down to 30 mA) and higher-leakage industrial loads. The relay is powered by a 24–240 V AC/DC control supply, making it usable across most global panel voltages without a separate power supply module.

The 30 mA to 40 A measuring range means this relay can detect a 30 mA ground fault (typical threshold for personnel protection) and still handle the leakage from a large motor drive or heater bank. The full-scale value is adjustable to 1.1 times the set range, giving a 10 % over-range headroom. The output contacts are rated 3 A at 250 V AC (50/60 Hz) and 0.1 A at 250 V DC — adequate for signaling a PLC input or dropping out a contactor coil, but not for direct motor switching. The relay offers delayed switching (2 seconds) to ride through nuisance trips from capacitive inrush, and includes an error memory and external reset input, so a remote PLC can clear latched faults without a panel visit.

Housed in a 22.5 mm wide enclosure (103 mm high, 91 mm deep), it snaps onto a standard 35 mm DIN rail with a screw-and-snap-on mechanism. The terminals accept 2x (24 … 16) AWG solid or stranded wire — spring-cage or screw terminals (the spec lists both solid and stranded ranges).

MPN
3UG4625-2CW30