Skip to main content
Siemens 3UG5643-1CS20

Siemens 3UG5643-1CS20 Digital Monitoring Relay, 90-690 V AC/

MPN 3UG5643-1CS20
Active

Siemens 3UG5643-1CS20 digital monitoring relay, current/active current/voltage/power factor/power monitoring, 90-690 V AC/DC supply, 0.05-10 A input, 24-240 V AC/DC control, 2 changeover contacts, screw terminal.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

3UG5643-1CS20 specifications
ParameterValue
SeriesCurrent, active current, voltage, power factor and power monitoring

Product details

The Siemens 3UG5643-1CS20 is a digital monitoring relay that tracks current, active current, voltage, power factor, and power on a single device. It accepts a supply voltage of 90 to 690 V AC/DC and measures current from 0.05 to 10 A. The control supply is 24 to 240 V AC/DC, 50/60 Hz. On-delay and tripping delay are independently adjustable from 0.1 to 999.9 s. Outputs are two changeover contacts with screw terminals.

The 90-690 V AC/DC supply range means this relay can be powered directly from most industrial control voltages without an external step-down transformer. The 0.05-10 A current input covers motor feeder monitoring, heater bank load tracking, and general branch-circuit current sensing. The 24-240 V AC/DC control supply powers the internal logic and relay coils. The adjustable on-delay and tripping delay (0.1-999.9 s) let you discriminate between momentary inrush and a sustained fault — useful for motor start-up or capacitor bank switching where a brief overcurrent is normal.

Packaged at 127 x 111 x 38 mm, it occupies roughly the footprint of a standard DIN-rail mounted relay. The screw terminals accept the usual panel wiring without special tooling. The two changeover contacts give one normally-open and one normally-closed set per output, which is enough to drive an alarm lamp and a separate trip signal to a PLC input.

MPN
3UG5643-1CS20