Skip to main content
Siemens 4EP3601-2DS00

Siemens 4EP3601-2DS00 Commutating Choke, 3-Phase 500V 14.4A

MPN 4EP3601-2DS00

Siemens SENTRON 4EP3601-2DS00 commutating choke for converters, 3-phase, 500V AC, 14.4A rated current, 16A max, IP00, screw-type terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP3601-2DS00 specifications
ParameterValue
IP ratingIP00
Depth0.078 m
Width0.148 m
Height0.126 m

Product details

Rated at 14.4 A with a 16 A maximum, it handles the continuous current of a 3-phase converter input at 500 V AC, 50 Hz. The 0.0023 H inductance and 4 % relative inductive voltage drop tell you the impedance it adds to the line: enough to protect the converter's input rectifier from excessive current spikes during switching transitions. This is an open-frame (IP00) component — no enclosure, so it mounts inside a panel or cabinet where the ambient temperature stays at or below 40 °C. The thermal class B insulation (130 °C hot-spot) means the choke can run at its rated load continuously without exceeding the winding temperature limit, as long as the ambient is respected. Total power loss breaks down to 39 W in the coil and 9.3 W in the iron core — that's 48.3 W of heat to vent from the panel, a figure the panel designer needs for thermal budgeting.

The 4EP3601-2DS00 measures 0.148 m wide by 0.126 m tall by 0.078 m deep — roughly 148 × 126 × 78 mm. No DIN-rail clip; it bolts to the mounting plate. The IP00 rating means it needs clearance from live parts and a cabinet door that keeps fingers out. Plan for the 48.3 W heat dissipation in the enclosure thermal calculation.

MPN
4EP3601-2DS00