Skip to main content
Siemens 4EP3801-1MS00

Siemens SIDAC 4EP3801-1MS00 Filter Reactor, 6.92 A, 0.017 H

MPN 4EP3801-1MS00

Siemens SIDAC filter reactor, 3-phase, 400 V AC, 6.92 A rated current, 0.017 H, 14% throttling, IP00, screw/tab terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP3801-1MS00 specifications
ParameterValue
IP ratingIP00
Depth0.12 m
Width0.178 m
Height0.153 m

Product details

The Siemens SIDAC 4EP3801-1MS00 is a 3-phase filter reactor rated at 6.92 A continuous with 0.017 H inductance and a 14% relative throttling factor, designed to smooth harmonics and limit inrush on 400 V AC, 50 Hz lines. At 61 W power loss and thermal class B (IEC 60085), it's built for continuous duty inside a panel — IP00 means it needs an enclosure for anything beyond a clean, dry electrical room. The screw-type and tab terminals accept common lug or ring connectors, so it wires in like any standard line reactor.

Rated 6.92 A at 400 V AC — that's the continuous current it can carry without exceeding the 40°C ambient rise. The 7.69 A maximum gives a short-term headroom for overload transients, but the steady-state load should stay at or under the 6.92 A figure. Inductance of 0.017 H with 14% throttling means it's tuned for typical variable-frequency drive input harmonics; the 134 Hz resonant frequency keeps it out of the way of the 50 Hz fundamental and the common switching bands. Reactive power of 5 kvar tells you the volt-amp reactive it exchanges with the line — useful for sizing upstream protection.

Where it goes in a panel

At 178 mm wide, 153 mm tall, and 120 mm deep, it takes up a modest footprint on a subplate or DIN-rail mount (though the IP00 rating and screw/tab terminals suggest a bolted-down installation rather than a snap-on rail). The 61 W heat dissipation needs to be factored into the enclosure's thermal budget — plan for airflow or derating if the ambient inside the cabinet runs above 40°C. The screw-type and tab terminals accept conductors up to what a standard line reactor of this current class handles; no special tooling needed.

MPN
4EP3801-1MS00