Skip to main content
Siemens 4EP3900-0AS00

Siemens SIDAC 4EP3900-0AS00 Output Reactor, 22A 3-Phase AC

MPN 4EP3900-0AS00

Siemens SIDAC series, output reactor, 4EP3900-0AS00, 3-phase AC, 22A maximum current, 8 kHz rated switching frequency, 0.3 mH inductance, IP00, screw-type terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP3900-0AS00 specifications
ParameterValue
IP ratingIP00
Depth0.12 m
Width0.21 m
Height0.17 m

Product details

What this output reactor does for a VFD line

The Siemens SIDAC 4EP3900-0AS00 is a 3-phase output reactor rated for a maximum continuous current of 22A at a switching frequency of 8 kHz, with an inductance of 0.3 mH per phase. It sits between the variable-frequency drive output and the motor leads, smoothing the PWM waveform and limiting the rate of voltage rise (dV/dt) that can stress motor insulation or cause bearing currents. The 22A rating means it handles motor loads drawing up to that current in continuous duty — sized for a typical 7.5 kW to 11 kW induction motor on a 400 VAC line, depending on the drive's switching pattern and cable length.

Mounting and integration — IP00, screw terminals, panel fit

The screw-type terminals accept field wiring for the main circuit, so no special crimp tooling is needed. Dimensions are 0.21 m wide by 0.17 m tall by 0.12 m deep, which fits a standard sub-panel footprint; plan for a 210 mm width on the mounting plate and allow clearance around the terminals for screwdriver access and cable bending radius.

Thermal design and duty cycle

Total power loss splits between the coil (70 W) and the iron core (11.7 W), summing to roughly 82 W of heat that must be dissipated inside the panel. The reactor is rated for a 40 °C ambient temperature with Class B insulation (130 °C hot-spot limit per IEC 60085). In a sealed cabinet, factor that 82 W into the thermal budget — forced airflow or a larger enclosure may be needed if the panel already runs near its dissipation limit.

MPN
4EP3900-0AS00