Skip to main content
Siemens 4EP3901-2DS00

Siemens 4EP3901-2DS00 Commutating Choke, 50.4A 3-Phase 400V

MPN 4EP3901-2DS00

Siemens SENTRON 4EP3901-2DS00 commutating choke for converters, 3-phase, 400V AC, 50.4A rated current, 56A max, 0.5mH, IP00, flat-type terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP3901-2DS00 specifications
ParameterValue
IP ratingIP00
Depth0.123 m
Width0.219 m
Height0.179 m

Product details

The Siemens 4EP3901-2DS00 is a 3-phase commutating choke (line reactor) for converter drives, rated 50.4 A continuous with a 56 A maximum at 50 Hz and 400 V AC. It's an IP00 open-frame component meant for enclosure mounting — no splash protection, so it lives inside a cabinet, not on the washdown floor.

The 0.5 mH inductance at 50.4 A gives a 4% relative inductive voltage drop at rated current and frequency. That 4% figure is the key sizing parameter — it tells you how much the choke will drop voltage under load, which affects DC bus ripple and motor torque at the drive output. For a standard 400 V drive, 4% drop is typical for smoothing commutation notches without excessive heating. Thermal class B (130 °C rise) and 67.3 W copper loss plus 21.6 W core loss at 40 °C ambient mean this choke sheds about 89 W total. That's heat that stays inside the enclosure — factor it into your cabinet cooling calc, especially if the drive and brake resistor are in the same panel. Flat-type terminals for the main circuit mean you're landing bus bars or crimp lugs, not wire ferrules. The 0.219 m width and 0.179 m height give you the footprint for panel layout — it's not a DIN-rail snap-on; it bolts to a backplate.

MPN
4EP3901-2DS00