Skip to main content
Siemens 4EP3901-4DS00

Siemens 4EP3901-4DS00 Commutating Choke, 56 A, 0.4 mH

MPN 4EP3901-4DS00

Siemens 4EP3901-4DS00 commutating choke for converters, 3-phase, 400 V AC, 56 A max, 0.4 mH, 4% voltage drop, IP00, flat-type terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP3901-4DS00 specifications
ParameterValue
IP ratingIP00
Depth0.123 m
Width0.219 m
Height0.179 m

Product details

Its 56 A maximum continuous current and 50.4 A rated current define the thermal limit for the load side — size the upstream converter and cabling for at least this continuous current. The 0.4 mH inductance with a 4% relative inductive voltage drop means this choke limits di/dt and reduces harmonic distortion on the converter's DC link; the 4% drop is typical for moderate smoothing without excessive voltage sag under load. The 70 A peak current rating handles short-duration inrush or transient events without saturating the core.

Deployment context

This is an open-frame (IP00) component — no enclosure, so it mounts inside a panel or cabinet where the ambient temperature stays at or below 40 °C. The flat-type terminals accept busbar or cable lugs; plan for panel wiring with adequate clearance around the 0.219 m width and 0.123 m depth. Thermal class B insulation per IEC 60085 means the winding withstands 130 °C hot-spot temperature — adequate for continuous duty in a ventilated enclosure. The 70.6 W coil power loss plus 15.7 W iron-core loss total about 86 W of heat to vent; factor that into the cabinet's thermal budget.

MPN
4EP3901-4DS00