Skip to main content
Siemens 4EP4010-0DS00

Siemens SIDAC 4EP4010-0DS00 Output Reactor, 42A 3-Phase

MPN 4EP4010-0DS00

Siemens SIDAC series, output reactor, 4EP4010-0DS00, 3-phase AC, 42A max, 8000Hz rated, 0.12mH, IP00, screw terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EP4010-0DS00 specifications
ParameterValue
IP ratingIP00
Depth0.14 m
Width0.21 m
Height0.17 m

Product details

What this output reactor does for a VFD line

The Siemens SIDAC 4EP4010-0DS00 is a 3-phase output reactor (choke) rated for 42 A maximum continuous current and an 8000 Hz switching frequency, with an inductance of 0.12 mH per phase. It sits between the variable-frequency drive output and the motor cable to limit the rate of voltage rise (dV/dt) and reduce reflected-wave peaks that can damage motor winding insulation on long cable runs. The 42 A current rating means it carries motor loads up to roughly 22 kW at 400 V (assuming typical service factor); the 8000 Hz switching-frequency rating matches modern IGBT drives that switch at 4–8 kHz. IP00 means it is an open-frame component — no enclosure protection. It mounts inside a control panel or drive cabinet, not in a washdown or outdoor location. The screw-type terminals accept standard power conductors; plan for panel space of 0.21 m wide × 0.17 m tall × 0.14 m deep.

Thermal and loss profile for panel integration

Total power loss is 108.4 W at rated load (65.2 W coil loss plus 43.2 W iron core loss) at a 40 °C ambient. That heat must be vented or conducted out of the enclosure — a 108 W continuous heat source in a sealed cabinet will raise internal temperature noticeably. Class B insulation (130 °C max hot-spot) per IEC 60085 gives a standard thermal margin for motor-circuit duty.

MPN
4EP4010-0DS00