Skip to main content
Siemens 4EU3632-0MF08-0AA0

Siemens SIDAC 4EU3632-0MF08-0AA0 Filter Reactor, 85.5A, 690V

MPN 4EU3632-0MF08-0AA0

Siemens SIDAC 4EU3632-0MF08-0AA0, 3-phase filter reactor, 85.5A rated / 95A max, 690V AC, 100 kvar, 7% throttling, IP00, screw/flat terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EU3632-0MF08-0AA0 specifications
ParameterValue
IP ratingIP00
Depth0.227 m
Width0.35 m
Height0.321 m

Product details

What this reactor does on your line

The Siemens SIDAC 4EU3632-0MF08-0AA0 is a 3-phase filter reactor rated for 85.5 A continuous (95 A maximum) at 690 V AC, 50 Hz. It's the inductive leg of a harmonic filter bank — the 7% relative throttling factor and 0.0011 H inductance are tuned to suppress the 5th and 7th harmonics that VFDs and rectifiers throw back onto the line. The 100 kvar reactive power rating tells you the capacitor bank it pairs with; the 189 Hz resonant frequency is where the trap is centered. This is a line-side component, not a load-side choke — it sits between your distribution and the drive's input, cleaning the current waveform before it hits the upstream transformer. Thermal class H (IEC 60085) means the winding insulation holds up to 180 °C hot-spot. With 315 W of power loss at rated load, this reactor will run warm — plan for natural convection clearance around the enclosure. IP00 means no ingress protection; it's intended for inside a cabinet, not on the plant floor.

Dimensions: 0.35 m wide, 0.321 m tall, 0.227 m deep. Main circuit connections are flat connector / screw-type terminals — expect bus-bar or ring-tongue lugs on the line and load sides. No DIN-rail clip; this is a bolt-down chassis mount inside the panel. Leave clearance for the 315 W heat dissipation and for the capacitor bank it's paired with.

Signal integrity note

If you're chasing harmonic noise that's coupling into nearby sensor cables, check the shield ground first — but the root cause is often the unfiltered line feeding the drive. This reactor's 189 Hz resonant trap knocks down the dominant 5th (250 Hz) and 7th (350 Hz) harmonics on a 50 Hz system. Install it as close to the drive input as practical; long unshielded runs between the reactor and the drive re-radiate the switching noise you're trying to suppress.

MPN
4EU3632-0MF08-0AA0