Skip to main content
Siemens 4EU4321-0BN00

Siemens 4EU4321-0BN00 Commutating Choke, 1132A 520V 3-Phase

MPN 4EU4321-0BN00

Siemens 4EU4321-0BN00 commutating choke for converter, 3-phase, 520V AC, 1132A rated, 50Hz, IP00, thermal class H, flat-type terminal.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

4EU4321-0BN00 specifications
ParameterValue
IP ratingIP00
Depth0.265 m
Width0.46 m
Height0.435 m

Product details

The Siemens 4EU4321-0BN00 is a commutating choke (line reactor) for converter applications, designed to limit current rise and reduce harmonics on the AC side of a drive or rectifier. It's a 3-phase, 520V AC rated choke pulling 1132A continuous — that's the current it'll carry without saturating, sized for a hefty drive line. Rated inductance is 0.000023 H (23 µH) with a relative inductive voltage drop of 4% at rated current and frequency — that 4% drop is the impedance it adds to the line, typical for a 4% line reactor used to protect the converter from line spikes and to smooth out current draw. Total power loss splits between the coil (712W) and the iron core (222W), for a combined 934W at rated load. That's heat that needs to leave the enclosure — at IP00 with no enclosure of its own, it's meant to be mounted in a ventilated cabinet or open panel where that dissipation can convect away.

That 1132A is the RMS line current it can pass without exceeding the insulation temperature limit — if your drive's input current is lower, it runs cooler; if higher, you need a bigger choke or forced cooling. It also carries a DC rated value of 1387.2A — that's the current it can handle if used on the DC bus side of a converter (though it's spec'd as an AC commutating choke). The DC rating is higher because DC doesn't have the same skin effect and core losses as 50Hz AC. IP00 means no ingress protection — it's an open component. Mount it in a clean, dry, ventilated enclosure; it's not for washdown or dusty environments. The flat-type main circuit connectors are bus-bar style lugs, not screw terminals — expect to bolt copper bars or cable lugs directly.

MPN
4EU4321-0BN00