Skip to main content
Siemens 5SL3206-7MB

5SL3206-7MB SENTRON MCB, 2P C 6A 400V 4.5kA

MPN 5SL3206-7MB
Active

Siemens SENTRON 5SL3206-7MB miniature circuit breaker, 2-pole, C characteristic, 6 A rated current, 400 V AC, 4.5 kA breaking capacity per EN 60898.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SL3206-7MB specifications
ParameterValue
Poles2
IP ratingIP20
Depth76 mm
Width36 mm
Height90 mm
Energy limitation class3

Product details

The Siemens SENTRON 5SL3206-7MB is a 2-pole miniature circuit breaker (MCB) with C-curve tripping characteristic, rated 6 A at 400 V AC. Its 4.5 kA breaking capacity per EN 60898 covers residential and light commercial distribution boards where the prospective fault current stays under that threshold — typical for most building infrastructure circuits in the EU and UK.

The C-curve means the magnetic trip activates at 5–10× rated current — so this 6 A breaker holds through motor inrush and capacitive loads that would nuisance-trip a B-curve, but clears faster than a D-curve for general-purpose wiring. Rated 400 V AC with a maximum operating voltage of 440 V AC in multi-phase configuration; single-phase circuits are limited to 250 V. The 4.5 kA breaking capacity is the standard domestic rating per EN 60898 — adequate for most final subcircuits in residential and commercial buildings, but verify against the utility's declared fault level at the board. Depth of 76 mm and height of 90 mm mean it fits standard distribution board enclosures with 70 mm installation depth. Mounting position is unrestricted — can be installed horizontally or vertically without derating the thermal trip. Pollution degree 2 covers normal indoor atmospheres with only non-conductive contamination.

Integration notes

Snap-on DIN rail mount, 2 MW width. Accepts auxiliary switches, shunt trips, and undervoltage releases via the accessory slot on the right side. Sealable — the toggle can be locked in the OFF position with a padlock hasp for lockout/tagout.

MPN
5SL3206-7MB