Skip to main content
Siemens 5SL4215-8

Siemens 5SL4215-8 SENTRON MCB, D Curve, 2-Pole, 1.6 A, 10 kA

MPN 5SL4215-8
Active

Siemens SENTRON 5SL4 series, miniature circuit breaker, 2-pole, D characteristic, 1.6 A rated current, 10 kA breaking capacity per EN 60898.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SL4215-8 specifications
ParameterValue
Poles2
IP ratingIP20
Depth76 mm
Width36 mm
Height90 mm
Energy limitation class3

Product details

The D curve holds through a 10–20× rated-current surge, so it clears only on a hard fault, not a normal load transient.

The D characteristic (tripping between 10× and 20× In) is the key selection parameter here. At 1.6 A, that means the magnetic trip fires between 16 A and 32 A — enough headroom for a small motor or a bank of LED drivers without nuisance trips. But the thermal element still protects the downstream cable at the continuous rating. Temperature derating is real on this part. The 1.6 A rating holds at 30 °C; at 40 °C it drops to 1.54 A, at 45 °C to 1.5 A, and at 55 °C to 1.43 A. The MCB is rated for ambient up to 55 °C with 95% humidity, so it's fine in a damp basement or outdoor-rated enclosure as long as the IP20 (with connected conductors) is respected. Multi-phase operation is rated at 400/440 V AC; single-phase supply voltage is 400 V AC. The DC rating maxes at 72 V, so this is an AC-primary breaker — don't spec it for a DC distribution bus above that.

Mechanical and panel fit

Height is 90 mm. Mounting position is any, so you can lay it sideways in a shallow enclosure if the DIN rail is oriented horizontally. It's sealable (tamper-evident seal wire can be threaded through the housing), halogen-free and silicon-free — important for clean-room or corrosive-environment panels where outgassing matters. Touch protection is built in; neutral conductor switching is not included (this is a 2-pole breaker that switches both phase conductors but does not break the neutral — verify your circuit topology). For a daily-switched load, consider a contactor or a dedicated switch-disconnector instead.

MPN
5SL4215-8