Skip to main content
Siemens 5SL6105-7RC

5SL6105-7RC SENTRON MCB, 0.5A 1-Pole C-Curve 7.5kA

MPN 5SL6105-7RC
Active

Siemens SENTRON 5SL6105-7RC, miniature circuit breaker, 0.5 A, 1-pole, C characteristic, 7.5 kA breaking capacity per EN 60898, 1 MWU.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SL6105-7RC specifications
ParameterValue
Poles1
IP ratingIP20
Depth76 mm
Width18 mm
Height90 mm

Product details

The Siemens SENTRON 5SL6105-7RC is a 1-pole miniature circuit breaker (MCB) rated 0.5 A with a C tripping characteristic and a 7.5 kA breaking capacity per EN 60898.

The C characteristic means the MCB trips magnetically at 5–10× rated current (2.5–5 A for this 0.5 A unit), so it handles moderate inrush from small inductive loads like contactor coils or control transformers without nuisance tripping. The 7.5 kA breaking capacity per EN 60898 certifies it can safely interrupt a fault current up to 7.5 kA at 415 V AC — adequate for most residential and light commercial service entrances where the prospective short-circuit current stays below that threshold. Single-pole design (1P) protects one phase; the neutral is not switched. The 0.5 A rating suits very low-current circuits — think signal supplies, pilot lights, or small control transformers — where a higher-rated breaker would not clear a fault before the wire or device overheats.

Installs in any orientation. Sealable with a lead seal for tamper-proofing in metered or security-conscious installations.

MPN
5SL6105-7RC