Skip to main content
Siemens 5SL6216-8CC

Siemens 5SL6216-8CC SENTRON MCB, 2-pole D 16A, 400V 6kA

MPN 5SL6216-8CC
Active

Siemens SENTRON 5SL6216-8CC miniature circuit breaker, 2-pole, D tripping characteristic, 16 A rated current, 400 V AC, 6 kA breaking capacity per EN 60898.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SL6216-8CC specifications
ParameterValue
Poles2
IP ratingIP20
Depth76 mm
Width36 mm
Height90 mm

Product details

The 5SL6216-8CC is a Siemens SENTRON miniature circuit breaker (MCB) with a D tripping curve, rated 16 A at 400 V AC and a breaking capacity of 6 kA per EN 60898. The 2-pole design switches both phase conductors, which is what you need for a single-phase 230 V load or a two-phase leg of a three-phase distribution board. The 6 kA breaking capacity at 400 V is adequate for most residential and light commercial service-entrance panels where the prospective fault current stays under that level; if your transformer or utility feed can deliver more, you'll need to step up to a 10 kA or higher-rated MCB in the same SENTRON family. The 36 mm width (2 modular units) and 76 mm depth let it snap onto a standard DIN rail in any mounting position.

The 5SL6216-8CC occupies 2 modular width units (36 mm) on a 35 mm DIN rail, with a 70 mm installation depth behind the panel surface. The sealable design lets you lock the toggle position with a lead seal or a small padlock — useful for circuits that must stay locked off during maintenance. Power loss per pole at rated current is 2.8 W in hot operating state, so in a densely packed enclosure with multiple MCBs side by side, account for the cumulative heat; the 75 °C maximum ambient is the upper limit for the enclosure interior, not just the room temperature.

Compliance and approvals

It carries the EN 60898 rating for 6 kA breaking capacity at 400 V AC, 50/60 Hz. Vibration resistance tested to 50 m/s² at 25 to 150 Hz per IEC 60068-2-6, so it holds up on machinery that shakes.

MPN
5SL6216-8CC