Skip to main content
Siemens 5SM2121-0

Siemens 5SM2121-0 SENTRON RCD Unit, 16 A, 10 mA, 2-pole

MPN 5SM2121-0

Siemens SENTRON 5SM2121-0 RC unit for 5SY miniature circuit breaker, 2-pole, type AC, rated fault current 10 mA, rated current 16 A, rated voltage AC 230 V.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SM2121-0 specifications
ParameterValue
Poles2
MountingREG

Product details

The Siemens SENTRON 5SM2121-0 is a residual-current device (RCD) unit designed as a plug-in accessory for the 5SY series miniature circuit breakers. It provides earth leakage protection for single-phase AC circuits at 230 V, rated 16 A with a 10 mA trip sensitivity — a high-sensitivity threshold suited for protecting individual circuits against fault currents that could otherwise go undetected by a standard MCB. As an instantaneous (type AC) device, it responds to sinusoidal AC residual currents without intentional delay, which means it clears ground faults as they occur but does not discriminate against nuisance tripping from transient surges on the line.

It clips directly onto the right-hand side of a compatible 5SY MCB — the fastening method is REG (rear-edge guide), so the combination forms a single 2-pole assembly that shares the busbar connection. The IP20 rating applies once the distribution board is installed with conductors connected; the assembly is not sealable, so it remains accessible for periodic testing via the built-in test circuit (minimum supply voltage 195 V for the test equipment).

MPN
5SM2121-0