Skip to main content
Siemens 5SN6232-7CP

Siemens 5SN6232-7CP MCB, 2-Pole, 400 V AC, 6/15 kA

MPN 5SN6232-7CP

Siemens SENTRON 5SN series, miniature circuit breaker (MCB), 2-pole, 400 V AC, 6 kA (EN 60898) / 15 kA (IEC 60947-2), depth 76 mm, width 36 mm, 2 modular width units.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SN6232-7CP specifications
ParameterValue
Poles2
Depth76 mm
Width36 mm
Height90 mm

Product details

The Siemens 5SN6232-7CP is a 2-pole miniature circuit breaker from the SENTRON 5SN family, rated for 400 V AC at 50 Hz. It carries a 6 kA breaking capacity per EN 60898 and a 15 kA rating per IEC 60947-2 — the higher figure applies when the breaker is installed in an industrial panel where the prospective fault current is known and the standard allows the industrial rating. That dual rating is the main thing to check against your panel's SCCR requirement. The 2-pole form factor (36 mm wide, 2 modular width units) snaps onto a standard DIN rail and occupies the same footprint as a typical residential double-pole MCB. Depth is 76 mm, installation depth 70 mm — leaves clearance behind a 100 mm deep enclosure back wall.

Rated for multi-phase and single-phase operation up to 440 V AC maximum — covers 400 V three-phase and 230/240 V single-phase circuits. DC rated maximum is 72 V, so it can switch a 48 V or 60 V DC control bus but not a 110 V DC battery bank. Power loss is 2.6 W per pole at rated current in hot operating state — two poles dissipate 5.2 W total. Not rated for frequent manual switching duty like a disconnect. Accepts solid conductors up to 35 mm² — enough for a 50 A feed on the line side.

MPN
5SN6232-7CP