Skip to main content
Siemens 5SN6232-8CP

Siemens 5SN6232-8CP MCB 5SN, 2-Pole, 400V AC, 6kA/15kA

MPN 5SN6232-8CP

Siemens SENTRON MCB 5SN, 2-pole, 400 V AC, 6 kA (EN 60898) / 15 kA (IEC 60947-2), 50 Hz, 2 MW units.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SN6232-8CP specifications
ParameterValue
Poles2
Depth76 mm
Width36 mm
Height90 mm

Product details

MCB 5SN — 2-pole, 400 V, dual-breaking capacity

The Siemens 5SN6232-8CP is a 2-pole miniature circuit breaker from the SENTRON 5SN series, rated for 400 V AC at 50 Hz. The 2-pole configuration (2 MW units wide, 36 mm) suits single-phase or two-phase branch circuits where both poles need coordinated overcurrent protection.

The 72 V DC maximum rating means it can also be used on DC control circuits within that voltage limit, though the AC rating is the primary spec for this part. The 10 000 mechanical operating cycles typical service life is standard for a DIN-rail MCB in this class — it's not a high-cycling contactor, but it will handle routine switching for decades in a panel that sees occasional breaker operation.

The solid conductor cross-section accepts up to 35 mm², which is generous for a 2-pole MCB and allows feeding through larger incoming cables before splitting to smaller branch circuits.

MPN
5SN6232-8CP