Skip to main content
Siemens 5SN6250-7CP

Siemens 5SN6250-7CP MCB, 2-Pole, 400 V AC, 6 kA EN 60898

MPN 5SN6250-7CP

Siemens SENTRON 5SN series MCB, 5SN6250-7CP, 2-pole, 400 V AC, 6 kA (EN 60898) / 10 kA (IEC 60947-2), 2 modular width units.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SN6250-7CP specifications
ParameterValue
Poles2
Depth76 mm
Width36 mm
Height90 mm

Product details

Siemens 5SN6250-7CP — 2-pole MCB for 400 V AC distribution

The Siemens 5SN6250-7CP is a 2-pole miniature circuit breaker from the SENTRON 5SN series, rated for 400 V AC supply voltage at 50 Hz. It carries a breaking capacity of 6 kA per EN 60898 and 10 kA per IEC 60947-2 — the higher figure under the industrial standard means it can safely interrupt fault currents up to 10 kA in a panel environment, giving you headroom over the residential-grade rating.

Two poles in a 36 mm wide housing (2 modular width units) means this breaker occupies two standard 18 mm DIN-rail slots. The 72 V DC maximum rating tells you this is primarily an AC device — it will switch DC control circuits up to 72 V, but the interrupting capacity on DC is not separately stated here. For DC-only applications, check the IEC 60947-2 DC rating on a dedicated DC-rated MCB. Solid conductor cross-section up to 35 mm² accepts the larger tails common in sub-distribution boards. Mechanical service life of 10,000 operating cycles is typical for this class of MCB — adequate for distribution switching, not intended for frequent motor-starting duty.

Snap-on DIN-rail mounting for 400 V AC branch-circuit protection in commercial and light-industrial distribution boards. The 6 kA EN 60898 rating suits domestic and commercial final circuits; the 10 kA IEC 60947-2 rating covers industrial panel applications where higher prospective fault current is expected.

MPN
5SN6250-7CP