Skip to main content
Siemens 5SP3740-2KK03

Siemens 5SP3740-2KK03 SENTRON MCB, 1P 40A E-Curve 25kA

MPN 5SP3740-2KK03

Siemens SENTRON 5SP3 series, main miniature circuit breaker (SHU), 1-pole, 40 A, E tripping characteristic, 25 kA, 230 V AC, 50 Hz.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SP3740-2KK03 specifications
ParameterValue
Poles1
IP ratingIP40
MountingBusbar
Depth89.5 mm
Height151.3 mm

Product details

The Siemens 5SP3740-2KK03 is a SENTRON main miniature circuit breaker (SHU) — a 1-pole, 40 A device with an E tripping characteristic, rated 230 V AC at 50 Hz. The E curve (a less common characteristic than B, C, or D) is designed for selective coordination with downstream MCBs — it holds through higher inrush without tripping, so a fault on a branch clears without taking the main breaker out. That selectivity matters in meter-panel installations where you want the feeder breaker to stay closed for a downstream fault.

Mounts on a 40-mm busbar system per DIN 43870 Part 2 — this is the standard busbar pitch for European meter-panel layouts, not a general DIN-rail mount. The 1.5 width units (roughly 27 mm wide) and 89.5 mm depth fit the compact form factor of a meter cabinet. Infeed is at the box terminal; outgoing feeder uses a spring-loaded terminal. The switch position indicator shows OFF = green, ON = red, which is a quick visual check during commissioning or troubleshooting. Rated IP40 with connected conductors, so it's suitable for enclosed panels but not washdown areas.

Shock resistance is 30 g for at least 3 impacts at 11 ms duration; vibration resistance is 2 g per IEC 60068-2-6 across 5 to 150 Hz. Mechanical service life is 20 000 switching cycles typical — that's more than adequate for a main breaker that sees infrequent operation. Overvoltage category IV means it's rated for the utility-side interface, not just downstream distribution.

MPN
5SP3740-2KK03