Skip to main content
Siemens 5SU1636-7FP32

Siemens 5SU1636-7FP32 SENTRON RCBO, 32A, 300mA, Type A, C-cu

MPN 5SU1636-7FP32
Active

Siemens SENTRON 5SU1636-7FP32, RCBO, 3-pole, 32 A rated, 300 mA residual current, Type A, characteristic C, 6 kA breaking capacity.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SU1636-7FP32 specifications
ParameterValue
Poles3
Depth72 mm
Width54 mm
Height85 mm
Energy limitation class1

Product details

The Siemens 5SU1636-7FP32 is a 3-pole RCBO (residual current circuit breaker with overcurrent protection) from the SENTRON family, combining a 32 A thermal-magnetic MCB with a 300 mA residual-current device in one 54 mm wide, 3-module-width unit. The C-curve tripping characteristic means it handles inrush currents up to 5–10× rated current before the magnetic trip fires — typical for motor starters, contactor coils, and small transformer loads where you don't want nuisance trips on energisation. The 300 mA residual-current sensitivity (Type A) catches sinusoidal AC faults and pulsating DC faults up to 6 mA smooth DC, which covers most modern electronics and variable-speed drive leakage without being so sensitive that it trips on normal cable capacitance.

Thermal derating — the real-world current rating

The 32 A rating holds only at 30 °C ambient. At 40 °C — common inside a loaded distribution board — the continuous rating drops to 30.8 A; at 50 °C it's 29.5 A; at 60 °C it's 28.8 A. The RCBO mounts in any position, and the supply cord can enter from top or bottom, which gives flexibility in a crowded enclosure. Installation depth is 70 mm — factor that into gland-plate clearance if you're using deep cable entries.

Environmental and installation constraints

The housing is rated IP20 only when installed in a distribution board with connected conductors — this is a panel-internal device, not a field-mounted unit. Insulation voltage is 500 V, so it's fine on 230/400 V TN systems.

MPN
5SU1636-7FP32