Skip to main content
Siemens 5SY4206-7CC

Siemens 5SY4206-7CC SENTRON MCB, 2P C-6 A, 10 kA

MPN 5SY4206-7CC

Siemens SENTRON, miniature circuit breaker, 5SY4206-7CC, 2-pole, C-characteristic, 6 A rated, 10 kA breaking capacity per EN 60898, 2 modular width units (36 mm).

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

5SY4206-7CC specifications
ParameterValue
Poles2
IP ratingIP20
MountingQuick assembly system
Temp operating max75 °C
Temp operating min55 °C
Depth76 mm
Width36 mm
Height90 mm
Energy limitation class3

Product details

The Siemens 5SY4206-7CC is a SENTRON 2-pole miniature circuit breaker with a C tripping characteristic, rated 6 A at AC and breaking 10 kA per EN 60898. That 36 mm width is the same footprint as two single-pole MCBs side by side, so it fits standard 18 mm-per-pole panel layouts without surprises.

The C-curve (tripping characteristic class C) means the magnetic trip fires at 5 to 10 times rated current — so for a 6 A breaker, the instant trip kicks in between 30 A and 60 A. This is the standard choice for motor-starter and transformer primary protection where inrush current is moderate; it avoids nuisance trips that a B-curve would see on a motor start. That's the standard residential and light-commercial panel level in most of Europe and markets that adopt IEC 60898. For industrial panels with higher prospective fault current, you'd step to an industrial MCB (IEC 60947-2) rated 15 kA or more. Temperature derating is baked into the spec: at 35 °C it holds the full 6 A; at 40 °C it's 5.51 A; at 45 °C it's 5.25 A; at 50 °C it's 4.97 A; at 55 °C it's 4.69 A.

The 36 mm width and 2 MW count mean it replaces any standard 2-pole C-curve MCB in a DIN-rail enclosure. Both top and bottom terminals are combined (phase + neutral busbar compatible), and neutral conductor switching is not built in — this is a 2-pole overcurrent device, not a switched neutral. IP20 with connected conductors is the norm for enclosed panels; no special sealing needed.

MPN
5SY4206-7CC