Skip to main content
Siemens 6EP1321-1LD00

Siemens 6EP1321-1LD00 Power Supply, 3 A, 24 VDC, IP20

MPN 6EP1321-1LD00

Siemens SITOP PSU100M power supply, 6EP1321-1LD00, 24 VDC, 3 A output, 85-264 VAC input, 84% efficiency, IP20, wall-mount.

$50.80 – $95.80 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6EP1321-1LD00 specifications
ParameterValue
Fuse protection typeinternal
Voltage12 V
Power36 W
Frequency47 ... 63 Hz
Phases1-phase
IP ratingIP20
MountingWall Mount
Depth38 mm
Width97 mm
Height98 mm
Efficiency84%

Product details

What this supply delivers — and what it doesn't

The Siemens 6EP1321-1LD00 is a SITOP PSU100M power supply delivering a rated 3 A at 24 VDC from a universal AC input of 85–264 V, 47–63 Hz. Efficiency sits at 84% under nominal conditions. The 3 A rating holds across 0–3 A at 25 °C ambient; above 50 °C you derate 2.5% per Kelvin up to the 70 °C ceiling — so at 60 °C ambient you're good for about 2.25 A before the internal thermal protection starts to fold back. That's the real-world number for a warm cabinet. Galvanic isolation is safety extra-low voltage (SELV) per EN 60950-1, so the output is safe to touch and suitable for feeding downstream 24 VDC control loads, sensors, and PLCs without an extra isolation barrier. The internal fuse handles primary-side protection; the feeder side wants a 10 A C-curve or 16 A B-curve MCB upstream. Wall-mount only; no DIN-rail clip on this variant.

Clearance and terminal detail

The unit requires 20 mm free air above, left, and right for convection cooling; bottom clearance is 0 mm — it can sit flush on a panel floor or shelf. The screw terminals on the input side accept L, N, and PE conductors from 0.3 to 1.3 mm² single-core or finely stranded. Output side has + and - terminals in the same wire range. That 20 mm top clearance is the critical one — stack another supply or a terminal block directly above and you choke the natural convection path. The bottom-zero clearance is convenient for tight enclosures, but the top gap is non-negotiable if you want the full 3 A at 50 °C.

Carries CE marking, cULus-Listed (UL 508, CSA C22.2 No. 107.1, File E197259), cURus (UL 60950-1, CSA C22.2 No. 60950-1, File E151273), and EAC. Not rated for ATEX, IECEx, DNV GL, FM, or UL hazardous locations — keep it out of classified areas and marine engine rooms unless you have a separate barrier.

MPN
6EP1321-1LD00