Skip to main content
Siemens 6EP1332-2BA10

Siemens 6EP1332-2BA10 Power Supply, 3 A Output, DIN Rail

MPN 6EP1332-2BA10

Siemens SITOP PSU100C power supply, 24 V DC / 3 A, 6EP1332-2BA10, snap-on DIN rail EN 60715, IP20, UL/CSA listed.

$64.01 – $188.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6EP1332-2BA10 specifications
ParameterValue
Fuse protection typeT 2 A/250 V (not accessible)
Voltage24 V
Power60 W
Frequency47 ... 63 Hz
Phases1-phase
IP ratingIP20
MountingSnaps onto DIN rail EN 60715 35x7.5/15
Depth125 mm
Width32.5 mm
Height125 mm
Efficiency85%

Product details

The Siemens 6EP1332-2BA10 is a SITOP PSU100C power supply that takes a single-phase AC input — 85…132 V or 170…264 V, 47…63 Hz — and delivers a regulated 24 V DC output rated at 3 A up to +45 °C, derating to 2.5 A above that. It snaps onto a DIN rail EN 60715 35x7.5/15, so it integrates into any standard control panel without extra brackets. Output is SELV per EN 60950-1 and EN 50178, which means it's safe to touch and suitable for powering PLCs, sensors, and other 24 V control gear in an industrial cabinet.

Ratings that matter for a cement plant or hot panel

Rated output current is 3 A up to +45 °C with natural convection — no fan to clog with dust. Above that, it linearly derates to 2.5 A, but the 60 °C operating ceiling (still convection-only) is realistic for a non-air-conditioned control room near a kiln. MTBF at 40 °C is over 2.1 million hours — that's about 240 years of continuous run, so in a cement line running 24/7 you can expect this supply to outlast several motor rewinds. No ATEX or IECEx rating, so not for direct installation in a hazardous zone — keep it in the general-purpose panel.

Carries CE, cULus-Listed (UL 508, CSA C22.2 No. 107.1), cCSAus (CSA C22.2 No. 60950-1, UL 60950-1, UL 1604), EAC, and DNV GL marine approval.

MPN
6EP1332-2BA10