Skip to main content
Siemens 6EP1332-4BA00

Siemens 6EP1332-4BA00 Power Supply, 3 A, ATEX, IECEx, cULus

MPN 6EP1332-4BA00
Active

Siemens SITOP PSU8200 power supply, 6EP1332-4BA00, 3 A rated output, ATEX II 3G Ex nA nC IIC T4 Gc, IECEx, cULus, IP20, 40 mm top clearance.

$104.14 – $200.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6EP1332-4BA00 specifications
ParameterValue
Fuse protection typeT 3,15 A/250 V (not accessible)
Voltage24 V
Power72 W
Frequency45...65 Hz
Phases1-phase
IP ratingIP20
MountingCan be mounted onto S7-1500 rail
Depth129 mm
Width50 mm
Height147 mm
Efficiency87%

Product details

The Siemens 6EP1332-4BA00 is a SITOP PSU8200 power supply delivering a rated output of 3 A over a 0 to 3 A range. It accepts a wide AC input: 85 to 132 V or 170 to 264 V, with automatic range selection, at line frequencies of 45 to 65 Hz. The unit provides a safety extra-low output voltage (SELV) per EN 60950-1, EN 50178, and EN 61132-2, making it suitable for control circuits in industrial panels. For hazardous area deployment, this unit carries ATEX (EX) II 3G Ex nA nC IIC T4 Gc and IECEx Ex nA nC IIC T4 Gc certifications, along with FM approval for Class I, Div. 2, Group ABCD, T4. It is also cULus-Listed (UL 508, CSA C22.2 No. 142) and holds DNV GL marine approval, EAC, and CE marking.

The power supply mounts directly onto an S7-1500 rail via its fastening method. The datasheet specifies a top clearance of 40 mm and a bottom clearance of 40 mm, with 0 mm required on the left and right sides. This compact footprint allows tight side-by-side placement on the DIN rail, but the vertical clearance must be maintained for natural convection cooling during operation from 0 to 60 °C.

Wiring and Feeder Protection

The manufacturer recommends a 10 A characteristic B or 6 A characteristic C miniature circuit breaker in the feeder. The maximum I²t value is 1.3 A²·s, and the typical no-load current draw is 0.4 mA, rising to a maximum of 3.5 mA.

MPN
6EP1332-4BA00