Skip to main content
Siemens 6EP1933-2NC11

Siemens 6EP1933-2NC11 DC Buffer Module, 24 V, 168 W, IP65

MPN 6EP1933-2NC11

Siemens SITOP DC buffer module, 6EP1933-2NC11, 24 V ±3 % output, 168 W, IP65, capacitor-based energy storage.

$1,101.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6EP1933-2NC11 specifications
ParameterValue
Input voltage range22.5–29 V DC
Power168 W
IP ratingIP65
MountingScrew mounting
Depth80 mm
Width470 mm
Height80 mm
Startup delay time typical0.6 s

Product details

The Siemens 6EP1933-2NC11 is a DC buffer module that holds up the 24 V DC bus through short mains dips using internal capacitor storage. Rated for 7 A continuous output with a peak of 22.5 A, it delivers 168 W of active power and stores 10 kW·s of energy — enough to ride through a typical half-cycle dropout or sequence a controlled shutdown. The IP65 enclosure (470 mm wide × 80 mm deep × 80 mm high) makes it suitable for washdown areas or dusty environments where a standard IP20 buffer would need a separate cabinet.

The 24 V ±3 % output matches the standard 24 VDC control voltage. The 7 A continuous rating covers a moderate control cabinet. The 22.5 A peak handles inrush loads.

Screw mounting — no DIN-rail clip, so plan for four fasteners through the enclosure flanges. The 470 mm width is substantial; it will not fit a standard cabinet depth if rear access is needed.

Connections and indicators

Power connections are via plug-in connector sets — no hardwired terminals, so you can pre-wire the cabinet and slide the module in last. A USB interface is on board for PC-based diagnostics or firmware updates. Status LEDs give clear feedback: green (OK) for normal operation, yellow (BAT) when buffering, red (ALARM) for pre-warning or lack of buffer standby, and green (CAP. > 85%) when the capacitor bank is charged above 85 %. That last one is handy during commissioning — you can see at a glance whether the module is ready to ride through a dip.

MPN
6EP1933-2NC11