Skip to main content
Siemens 6ES7136-6BA00-0CA0

Siemens 6ES7136-6BA00-0CA0 ET 200SP Digital I/O Module, 24 V

MPN 6ES7136-6BA00-0CA0
Obsolete

Siemens SIMATIC ET 200SP, digital I/O module, 6ES7136-6BA00-0CA0, 8 DI / 8 DQ, 24 V DC, SIL 3, 15 x 73 x 58 mm.

$122.22 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7136-6BA00-0CA0 specifications
ParameterValue
Depth58 mm
Width15 mm
Height73 mm
I/O channels8
Source sink inputP-reading, Yes

Product details

The Siemens 6ES7136-6BA00-0CA0 is an ET 200SP digital I/O module packing 8 inputs and 8 outputs in a 15 mm-wide slice. Input thresholds are clean: a signal '0' spans -30 to +5 V, and a signal '1' kicks in from +15 to +30 V, with a typical draw of 3.7 mA per input at 24 V. Outputs are short-circuit protected, and the module delivers up to 0.3 A per channel at 60 °C, with a total encoder current cap of 800 mA across all outputs. That 0.3 A derating is worth noting if you're packing the cabinet warm — the headline per-channel number drops when ambient climbs.

Diagnostics and integration

This module gives you a full diagnostic suite: a green/red DIAG LED for module status, red LEDs per channel for fault indication, and a green RUN LED plus red ERROR LED on the front. It supports diagnostic alarms and I&M data (I&M0 to I&M3), so you can tag it with location and installation date — handy for asset tracking in larger ET 200SP racks. The module uses BU type A0 base units, so it snaps into the standard ET 200SP backplane without adapters. Switching times are symmetrical: 0.4 ms minimum and 20 ms maximum for both on and off transitions. That's fast enough for most discrete sensing and valve actuation, but if you need sub-millisecond response for high-speed counting, you'll want a dedicated counter module. The inputs are source/sink (P-reading), and automatic encoding means the base unit tells the module its position — no DIP switches to set.

MPN
6ES7136-6BA00-0CA0