Skip to main content
Siemens 6ES7138-4CF03-0AB0

Siemens 6ES7138-4CF03-0AB0 ET200S 2 F-DO, 24 V DC, 2 A

MPN 6ES7138-4CF03-0AB0

Siemens ET200S fail-safe digital output module, 2 F-DO, 24 V DC, 2 A, SIL 3, 30 mm width, 52 mm depth, 81 mm height.

$203.20 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7138-4CF03-0AB0 specifications
ParameterValue
Depth52 mm
Width30 mm
Height81 mm

Product details

Two fail-safe outputs, 2 A each, SIL 3 rated

The Siemens 6ES7138-4CF03-0AB0 is an ET200S fail-safe digital output module with two outputs, each rated 2 A at 24 V DC. It is certified for use in safety applications up to SIL 3 and Category 4.

Output current and temperature derating

Each output channel delivers 2 A rated current, but the total module current is temperature-dependent: 7 A up to 55 °C, dropping to 6 A at 40 °C and again at 60 °C. This means at 55 °C ambient you can run both channels at 2 A with headroom; above that, the total current envelope tightens. The module includes electronic short-circuit protection with a response threshold of 5 to 12 A for a short to ground, and 25 to 45 A for a short to P potential. It also detects wire-break conditions on the output lines.

Switching frequency and load types

Resistive loads switch at up to 30 Hz; inductive loads at only 0.1 Hz. The 10 Hz limit on lamp loads reflects the inrush current stress. For a solenoid or contactor coil, plan on a 10-second minimum cycle time. Cable runs can extend to 200 m, shielded or unshielded, which covers most cabinet-to-machine distances in a plant.

Diagnostics and status indication

The module reports a group error via a red SF LED, monitors the load voltage supply (PWR green LED), and makes diagnostic data readable over the backplane bus. It detects missing load voltage and short circuits, feeding that back to the safety CPU. Power draw from the backplane bus is 28 mA at 24 V DC; total module power loss is 4 W typical.

MPN
6ES7138-4CF03-0AB0