Skip to main content
Siemens 6ES7151-1BA00-0AB0

Siemens 6ES7151-1BA00-0AB0 SFB Interface Module, PROFIBUS DP

MPN 6ES7151-1BA00-0AB0

Siemens ET200S SFB interface module, 6ES7151-1BA00-0AB0, PROFIBUS DP, 450 MHz multi-processor CPU, PROFIsafe, ATEX II 3G.

$182.88 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7151-1BA00-0AB0 specifications
ParameterValue
Product typeSFB
InterfacePluggable synchronization submodule (FO)
AS-InterfaceVia add-on, Yes
Depth219 mm
Width50 mm
Height290 mm
Nesting levels7
Required slots2

Product details

What this interface module does in the ET200S rack

The Siemens 6ES7151-1BA00-0AB0 is the SFB interface module that sits in the ET200S distributed I/O station, handling the PROFIBUS DP fieldbus connection to the controller. Its 450 MHz multi-processor CPU runs the communication stack and the safety logic for PROFIsafe, so this single module manages both standard and safety I/O on the same bus line.

Fieldbus and safety profile

PROFIBUS DP is native — no add-on module needed. The module also supports acyclic parameterisation and diagnostics. PROFIsafe runs over the same PROFIBUS cable, so a safety CPU can communicate with F-I/O modules through this interface without a separate safety bus. The module can act as both a PROFIBUS DP client and server. For TCP/IP and UDP communication, the module uses the integrated PROFINET interface and loadable function blocks. MODBUS RTU is available via an add-on. S7 routing is supported, which lets the module forward data between PROFIBUS and other networks in the TIA Portal topology.

I/O capacity and system limits

The module handles up to 16 kbyte of inputs and 16 kbyte of outputs, with the actual maximum depending on the System Expansion Card fitted. It supports 8 concurrent RDREC (SFB 52) and 8 WRREC (SFB 53) operations per interface, with a total cap of 32 across all external interfaces. The overall number of modules in the ET200S station is 120. System diagnostics are handled through SFC 51 (RDSYSST) with 8 concurrent calls, and the SysLog function supports up to 4 TCP receivers with a buffer capacity of 3 200 entries.

Operating temperature range is 0 °C to 70 °C. The module carries CE mark, cULus, and CCC approvals. It is ATEX certified for Zone 22: ATEX II 3G Ex ec IIC T4 Gc, which means it can be installed in a non-hazardous area with connections into a potentially explosive gas atmosphere — relevant for chemical and pharmaceutical lines where the ET200S rack sits outside the classified zone.

MPN
6ES7151-1BA00-0AB0