Skip to main content
Siemens 6ES7336-4GE00-0AB0

Siemens 6ES7336-4GE00-0AB0 SM 336 F-AI, 6 Analog Inputs

MPN 6ES7336-4GE00-0AB0
End of Life

Siemens SM 336 F-AI, 6ES7336-4GE00-0AB0, fail-safe analog input module, 6 channels, 4-20 mA / 0-20 mA, SIL 3, Category 4, 24 VDC, 120 x 40 x 125 mm.

$883.16 – $1,690.00 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7336-4GE00-0AB0 specifications
ParameterValue
Depth120 mm
Width40 mm
Height125 mm

Product details

6 fail-safe analog inputs, SIL 3, end-of-life

The Siemens 6ES7336-4GE00-0AB0 is an SM 336 F-AI fail-safe analog input module for the S7-300 system, providing 6 channels for current measurement from 2-wire or 4-wire transducers in the 4-20 mA and 0-20 mA ranges. Rated SIL 3 per IEC 61508 and Category 4 per EN 954-1, this module is designed for safety-critical process monitoring where a fault must be detected and the system brought to a safe state.

Input specs and integration timing

Each of the 6 analog inputs has a typical input resistance of 150 ohms (max. 175 ohms) for both the 0-20 mA and 4-20 mA ranges. Resolution is 16 bits (15 bits + sign) with overrange, and the integration time is 20 ms at 50 Hz or 16.7 ms at 60 Hz — matching the line frequency to reject mains hum. The module draws 150 mA typical from the 24 VDC supply and up to 90 mA from the 5 V backplane bus. Power dissipation is 4.5 W typical.

Safety diagnostics and channel isolation

Diagnostic alarm and diagnostic information are readable; a group error SF (red) LED signals a fault. Fail-safe operation means the module can detect internal and external faults and report them. Channel-to-channel isolation, channel-to-backplane bus isolation, and channel-to-electronics-power-supply isolation are all provided. Isolation is tested at 370 V for 1 minute. Reverse polarity protection on the 24 VDC supply is included. The module requires a 20-pin front connector (ordered separately).

No official successor order code from Siemens is on record for this module. For a new design, consider the current-generation fail-safe analog input modules in the S7-1500F or ET 200SP F system — but those require a different backplane and engineering environment.

MPN
6ES7336-4GE00-0AB0