Skip to main content
Siemens 6ES7357-4AH01-0AE0

Siemens 6ES7357-4AH01-0AE0 FM 357-4 LE, 750 kHz

MPN 6ES7357-4AH01-0AE0
End of Life

Siemens SIMATIC S7-300 FM 357-4 LE positioning module, 6ES7357-4AH01-0AE0, 750 kHz pulse frequency, 18 digital inputs, 8 digital outputs, 750 kbyte NC memory, 24 V DC supply, 118 x 200 x 125 mm.

$2,428.68 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6ES7357-4AH01-0AE0 specifications
ParameterValue
Input voltage5 V difference signal (phys. RS 422)
Output current-3 to +3 mA
Depth118 mm
Width200 mm
Height125 mm

Product details

Positioning module for multi-axis stepper and servo control

The Siemens 6ES7357-4AH01-0AE0 is an FM 357-4 LE positioning module for the S7-300 rack. It drives up to 8 axes for any purpose, supporting stepper motors via pulse-direction outputs and servo drives via analog setpoints or SSI absolute encoder feedback. Pulse frequency tops out at 750 kHz, which translates to a maximum motor speed of 3000 RPM with a 1000-line encoder — adequate for most pick-and-place, indexing, and linear-motion axes in packaging and assembly machinery. The 750 kbyte NC program memory stores multi-segment motion profiles without external storage.

Encoder interface and I/O complement

The module accepts 5 V differential RS 422 encoder signals with a maximum cable length of 50 m shielded, dropping to 35 m in hybrid mode with servo axes. This covers most machine-mounted encoder runs without a repeater. Input frequency ceiling is 1 MHz; the SSI telegram length is parameterizable to 13, 21, or 25 bit. Digital I/O: 18 inputs and 8 outputs. Inputs accept 24 V signals with thresholds of -3 to +5 V for signal '0' and +11 to +30 V for signal '1'. Outputs switch up to 300 mA each at 24 V, suitable for driving small contactors, indicators, or solenoid valves directly. A 40-pin front connector is required. Power draw: 100 mA from the 5 V backplane bus plus 15 W typical total loss. The 24 V field supply powers the I/O and encoder interface; the 5 V rail only serves the backplane logic.

The 40-pin front connector carries all field wiring — encoder signals, digital I/O, and 24 V supply. Cable entries are through the front face; allow 50 mm clearance above and below the module for connector insertion and cable bend radius.

MPN
6ES7357-4AH01-0AE0