Skip to main content
Siemens 6GT2801-2BA10-0AX2

Siemens 6GT2801-2BA10-0AX2 RF340R RFID Reader, RS422, ATEX,

MPN 6GT2801-2BA10-0AX2
Active

Siemens SIMATIC RF300 RF340R (GEN2), Reader with integrated antenna, RS422 interface (3964R), ATEX Zone 3G/3D, IECEx Gc/Dc, IP64, 75 x 75 x 41 mm.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6GT2801-2BA10-0AX2 specifications
ParameterValue
IP ratingIP64
Mounting2 x M5 screws
Shock acceleration500 m/s²
ColorTi gray
Depth75 mm
Width75 mm
Height41 mm
MaterialPA 12

Product details

What this reader is

The 6GT2801-2BA10-0AX2: The Siemens SIMATIC RF300 RF340R (GEN2) is a fixed-mount RFID reader with an integrated antenna, built for industrial identification on conveyor lines, pallet tracking, and work-in-progress monitoring. It operates at 13.56 MHz and supports RF300-specific, ISO 15693, ISO 18000-3, and ISO 14443 protocols, plus MOBY E transponders. The RS422 interface uses the 3964R protocol, with a maximum cable length of 1000 m. Read and write access per byte is 0.13 ms typical. Maximum transfer rate is 106 kbit/s. Read range is 140 mm maximum, but this is transponder-dependent — check the Siemens support note for your specific tag type.

Hazardous area certification

This variant carries ATEX marking II 3 G Ex ec IIB T4 Gc and II 3 D Ex tc IIIC T80 °C Dc, plus IECEx certification. That means it is approved for Zone 2 (gas) and Zone 22 (dust) hazardous areas — common in chemical blending, pharmaceutical granulation, and grain handling.

Power and mounting

Runs on 24 VDC nominal (20.4 to 28.8 V range), drawing 0.06 A typical. Connection is via an M12 8-pin male connector. Mounts with two M5 screws through the 75 x 75 mm face; the housing is PA 12 plastic in Ti gray. Dimensions are 75 mm wide, 75 mm deep, 41 mm tall — compact enough for tight panel or machine-frame placement. Vibration resistance is 200 m/s², shock resistance 500 m/s² per EN 60721-3-7 Class 7 M2.

MPN
6GT2801-2BA10-0AX2