Skip to main content
Siemens 6GT2810-2HG80

Siemens 6GT2810-2HG80 SIMATIC RF680T RFID Tag, IP68/IPx9K, 8

MPN 6GT2810-2HG80

Siemens SIMATIC RF680T heat-resistant RFID tag, 6GT2810-2HG80, 130x32x15 mm, ISO 18000-6C / EPC Class 1 Gen 2, 865-928 MHz, NXP G2XM, IP68/IPx9K, IECEx.

$114.30 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6GT2810-2HG80 specifications
ParameterValue
IP ratingIP68 / IPX9
Mounting2 x M6 screws
Temp operating max220 °C
Temp operating min140 °C
Shock acceleration1000 m/s²
ColorBlack
Depth130 mm
Width32 mm
Height15 mm
MaterialPPS
PolarizationLinear

Product details

The Siemens 6GT2810-2HG80 is a SIMATIC RF680T UHF RFID transponder built for the RF600 system. It operates across 865 to 928 MHz, covering global UHF bands, and uses the NXP G2XM chip with EPCglobal Class 1 Gen 2 / ISO 18000-63 protocol. The tag is designed for asset tracking and identification in environments where standard tags fail — think paint-shop conveyors, engine-block carriers, autoclave cycles, or foundry work-in-progress where the tag must survive both the process heat and high-pressure washdown.

The IP68/IPx9K rating means the tag body withstands continuous immersion beyond 1 m and high-pressure, high-temperature washdown — the same standard used in food-processing and chemical plants. The tag is also IECEx and ATEX certified (II 2G Ex ib IIB T6 to T2 Gb, II 2D Ex ib IIIB T135 °C Db), so it can be mounted in Zone 1 gas and Zone 21 dust hazardous areas without an additional enclosure. The temperature endurance is the headline spec for this part. It operates continuously at 140 °C, survives 5000 hours or 3000 cycles at 200 °C, and 2000 hours or 1500 cycles at 220 °C. Outside the read/write area it can sit at -40 to +220 °C. That thermal profile is what separates the RF680T from commodity UHF tags — it is sized for a paint oven or a hot-metal handling line, not a warehouse pallet rack. Read range is listed as up to 4 m, but that figure is reader-dependent and the system manual notes overrange is possible. In practice, range depends on the RF600 reader model, antenna gain, and mounting surface (metal vs plastic). The tag is multitag-capable and supports a max transfer rate of 320 kbit/s, which matters when you are reading a rack of parts in motion. Memory is organized as 96-bit (12-byte) EPC, expandable to 240-bit (30-byte), plus 64 bytes of user memory and a 64-bit TID. The user memory is lockable, write-protected, and password-protectable — useful for writing a serial number or process step that cannot be overwritten on the line.

The tag carries cULus approval and IECEx certification, so it is accepted in North American and international hazardous-location installations. This is a quoted-to-order line; we source it against an RFQ for the required quantity.

Mounting and mechanical constraints

The tag measures 130 mm deep by 32 mm wide by 15 mm high, in a black PPS (polyphenylene sulfide) housing. It fastens with two M6 screws. The material is silicone-free, which matters in paint shops where silicone contamination causes fisheyes. Shock resistance is rated to 1000 m/s² per DIN EN 60721-3-7 Class 7M3, and vibrational acceleration to 200 m/s². Note that torsion and bending stress are not permissible — the tag must be mounted on a flat surface without flexing.

MPN
6GT2810-2HG80