Skip to main content
Siemens 6GT2821-1BC32

Siemens 6GT2821-1BC32 SIMATIC RF210R RFID Reader, IO-Link, I

MPN 6GT2821-1BC32
Active

Siemens SIMATIC RF200 RF210R RFID reader, 6GT2821-1BC32, IO-Link V1.1, IP67, 13.56 MHz, 20 mm range, M18 x 83 mm.

$259.08 Ref. price · indicative, final on quote
Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6GT2821-1BC32 specifications
ParameterValue
IP ratingIP67
Mounting2 nuts M18 x 1 (included in scope of supply)
Shock acceleration500 m/s²
Colorsilver/pastel turquoise
Height83 mm
MaterialBrass, nickel-plated, PBT
Diameter18 mm

Product details

The Siemens 6GT2821-1BC32 is a SIMATIC RF200 series RF210R RFID reader with an integrated antenna, designed for reading and writing to ISO 15693 transponders (MDS Dxxx) over an IO-Link V1.1 interface. It operates at 13.56 MHz with a maximum read range of 20 mm (range depends on the transponder type), and communicates with an IO-Link master at up to 230 kbit/s over a maximum cable length of 20 m. Rated for 24 V DC (20.4 to 28.8 V range), it draws 0.05 A typical at 24 V, and provides a 3-color LED for local status indication.

Housed in an M18 x 83 mm nickel-plated brass / PBT body with IP67 protection, it is built for washdown or dusty environments on a production line — think conveyor tracking, tool identification, or pallet routing in automotive or logistics. Fastens with two M18 x 1 nuts (supplied), and connects via a standard M12 4-pin male connector — no special tooling needed to swap into an existing RFID station. Silicon-free construction suits paint-shop or coating-line installations where outgassing contaminants are a concern.

It is a mature, field-proven design with an MTBF of 505 a, which translates to a mean time between failures of over half a millennium in continuous operation — a reliability figure that makes it a set-and-forget component for the panel builder.

The 20 mm maximum read range is the practical limit for a stationary reader over an ISO 15693 tag — enough for a part passing within a hand's width, but not for long-distance gantry applications. The actual range depends on the transponder size and orientation, so verify against your specific MDS Dxxx tag. IO-Link V1.1 means it speaks the standard point-to-point protocol for smart sensors and actuators; the master handles the cyclic data exchange (32-byte IO process data) and parameter configuration over the same 3-wire cable. Shock resistance to EN 60721-3-7 Class 7 M2 (500 m/s²) and vibration resistance at 200 m/s² means it holds up on a machine tool or a vibratory conveyor without losing alignment.

MPN
6GT2821-1BC32