Skip to main content
Siemens 6GT2821-4AC10

Siemens 6GT2821-4AC10 SIMATIC RF240R RFID Reader, 13.56 MHz,

MPN 6GT2821-4AC10
Active

Siemens SIMATIC RF200 RF240R RFID reader, 6GT2821-4AC10, RS422 interface (3964R), IP67, -25 to +70 °C, 50 x 50 x 30 mm, integrated antenna.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

6GT2821-4AC10 specifications
ParameterValue
IP ratingIP67
Mounting2 x M5 screws
Shock acceleration500 m/s²
Coloranthracite
Depth50 mm
Width50 mm
Height30 mm
MaterialPA6.6

Product details

The Siemens 6GT2821-4AC10 is a SIMATIC RF200 RF240R RFID reader with an integrated antenna, operating at 13.56 MHz and communicating via an RS422 interface using the 3964R protocol. It reads and writes ISO 15693 and ISO 18000-3 transponders (MDS Dxxx family), with a read/write access time of 0.6 ms per byte and a maximum transfer rate of 26.5 kbit/s. The IP67-rated housing (50 x 50 x 30 mm, anthracite PA6.6) withstands washdown environments, making it suitable for production lines where coolant, dust, or hose-down cleaning is routine.

The 13.56 MHz HF band gives this reader a typical read range of up to 65 mm, though range depends on the specific transponder type — check Siemens support entry 67384964 for pairing. The RS422 interface supports cable runs up to 1000 m, which matters when the reader sits far from the controller on a long conveyor line. Power draw is 0.05 A typical at 24 V DC (20.4 to 28.8 V range), so it loads the 24 V bus lightly; multiple readers can share one supply without derating. The 3-color LED gives local status without needing to open a panel. MTBF is listed at 430 a, which for a fixed industrial reader means the expected service life comfortably exceeds typical production line refresh cycles.

Mounts via two M5 screws through the 50 x 50 mm face; no DIN-rail clip, so plan for direct bracket or machine-frame attachment. Shock resistance per EN 60721-3-7 Class 7M2 (500 m/s²) and vibration resistance at 200 m/s² — rated for direct mounting on vibrating equipment like packaging machines or transfer stations. The M12 8-pin connector handles the RS422 and power in one cable; specify a shielded M12 cordset for runs over a few meters.

MPN
6GT2821-4AC10