Skip to main content
Omron E5CC-QX0AUM-000

Omron E5CC-QX0AUM-000 Temperature Controller, SSR Drive

MPN E5CC-QX0AUM-000
Active

Omron E5CC series process/temperature controller, 100-240VAC supply, voltage output for external SSR, panel mount, IP66 front, 45mm square cutout.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5CC-QX0AUM-000 specifications
ParameterValue
SeriesE5CC
Output signalVoltage (External SSR)
Supply voltage100 to 240VAC
IP ratingIP66
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.265 lb (120.2 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

The Omron E5CC-QX0AUM-000 is a 1/16 DIN process and temperature controller from the E5CC series, accepting RTD, thermocouple types B, E, J, K, L, N, PLII, R, S, T, U, W, plus 0-20mA and 0-10VDC analog inputs. Its voltage output drives an external solid-state relay (SSR), making it a clean fit for electric heater or oven control where the SSR handles the load current and the controller provides the logic-level gate signal. The dual-color LCD backlight shows two rows of four characters each — the upper row 0.600" (15.20 mm) tall, the lower 0.280" (7.10 mm) — so setpoint and process value are readable from a few feet away on a panel. The 45.00 mm square cutout matches the standard 1/16 DIN hole; the IP66-rated front bezel resists washdown splashes and dust ingress, which suits food, beverage, or pharmaceutical panel surfaces that get hosed down.

Control and wiring

Control method is selectable between On/Off and proportional (PID). The PID autotune routine identifies process characteristics and sets gains automatically — no manual loop-tuning required for most thermal processes. The 11-pin octal base (plug-in termination) means the controller can be swapped without disturbing field wiring; keep a spare base wired in the panel and the swap takes under a minute. Supply is 100-240VAC, so it runs directly on line voltage without an external power supply.

MPN
E5CC-QX0AUM-000