Skip to main content
Omron E5CC-QX1DUM-000

Omron E5CC-QX1DUM-000 Temperature Controller, 24VAC/DC, PID

MPN E5CC-QX1DUM-000
Active

Omron E5CC series process/temperature controller, 24VAC/DC supply, relay and voltage (external SSR) output, PID control, panel mount with IP66 front, 11-pin octal base.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5CC-QX1DUM-000 specifications
ParameterValue
SeriesE5CC
Output signalRelay, Voltage (External SSR)
Supply voltage24 VAC/DC
IP ratingIP66
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.265 lb (120.2 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

Panel fit and wiring constraints

The E5CC-QX1DUM-000 mounts into a 45 mm square panel cutout and seals to IP66 at the front face — the gasket sits behind the bezel, so the cutout edge needs to be clean for the seal to hold against washdown. Termination is via an 11-pin octal socket (not included), so the wiring harness terminates at the socket base, not the controller body; swapping the controller leaves the field wiring undisturbed. Supply is 24 VAC/DC, which can share the same control transformer or DC bus as the PLC cabinet. The dual-colour LCD shows process value and setpoint in two rows (0.600" and 0.280" character heights).

Input and output capability

The controller accepts RTD and ten thermocouple types (B, E, J, K, L, N, PLII, R, S, T, U, W) covering –200 °C to 2300 °C, plus 0–20 mA and 0–10 VDC linear process signals. That range handles everything from cryogenic RTD loops to high-temp kiln thermocouples on one unit — just reconfigure the input type in software. Outputs are a relay and a voltage pulse for an external SSR. The relay handles on/off or alarm duty up to its contact rating; the SSR drive lets the controller switch a solid-state relay for faster cycling on electric heaters without wearing out a mechanical contact. Control method is selectable between on/off and proportional (PID) with auto-tune. For most process loops — ovens, extruder zones, packaging seal bars — the PID mode with auto-tune gets the loop stable in a few cycles without manual gain tweaking.

MPN
E5CC-QX1DUM-000