Skip to main content
Omron E5EC-QX4A5M-010

Omron E5EC-QX4A5M-010 Process Controller, 92x45mm Cutout

MPN E5EC-QX4A5M-010
Active

Omron E5EC series, E5EC-QX4A5M-010 Process/Temperature Controller, 100-240VAC, 4 relay + voltage SSR output, PID control, heater fault detection, IP66, 92x45mm rectangular cutout.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5EC-QX4A5M-010 specifications
ParameterValue
SeriesE5EC
Output signalRelay (4), Voltage (External SSR)
Supply voltage100 to 240VAC
IP ratingIP66
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.463 lb (210.01 g)
PackageBox
Control methodOn/Off, Proportional (PID)

Product details

Panel fit and output configuration

The E5EC-QX4A5M-010 sits in a panel cutout 92mm wide by 45mm high – rectangular, not the 48x48 square of the E5CC family. If your BOM or panel layout expects that smaller footprint, this controller doesn't drop in without a new punch. Four relay outputs and a voltage pulse for an external SSR give you independent control loops plus alarm or event handling. It accepts RTD, thermocouple (B/E/J/K/L/N/PLII/R/S/T/U/W), 0 ~ 20mA, or 0 ~ 10VDC inputs and runs on 100 ~ 240VAC. The IP66 face makes it washdown-safe in food or pharma lines.

Compared to the E5CC series (E5CC-CX3A5M-005)

Heater fault detection is absent on the E5CC-CX3A5M-005; the E5EC adds it as a standard feature along with an event input for remote lockout or setpoint shift. Both are active and accept the same sensor types, but the cutout size is the hard constraint. If your panel is already punched for the 92x45 shape, the E5EC is the direct fit. If it's 48x48, you're looking at a different bracket or a panel rework.

Screw terminals accept stranded or solid wire. Power, sensor, and output wiring land on the rear connector block – no plug-in base, so pull the terminal screws before panel removal. Panel cutout is 92 x 45mm with the gasket providing the IP66 seal. Mounting bracket is included; tighten the two screws evenly to avoid warping the bezel.

MPN
E5EC-QX4A5M-010