Skip to main content
Omron E5EC-TQQ4A5M-019

Omron E5EC-TQQ4A5M-019 Process Controller, 100-240VAC

MPN E5EC-TQQ4A5M-019
Active

Omron E5EC-T series, Process/Temperature Controller (RTD, TC, mA, V), 100-240VAC supply, 4 relay + 2 voltage (external SSR) outputs, IP66 front, panel mount, screw terminals.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5EC-TQQ4A5M-019 specifications
ParameterValue
SeriesE5EC-T
Output signalRelay (4), Voltage (External SSR) (2)
Supply voltage100 to 240VAC
IP ratingIP66
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.463 lb (210.01 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

What this controller does on your panel

The Omron E5EC-TQQ4A5M-019 is a 1/16 DIN-sized process and temperature controller from the E5EC-T series, accepting inputs from RTDs, thermocouples (types B, E, J, K, L, N, PLII, R, S, T, U, W), 0-20mA, or 0-10VDC signals — covering most industrial temperature and analog process loops without needing a signal conditioner. It runs on a universal 100-240VAC supply, so it drops straight into a panel fed from line voltage without an external power supply module. The output stage gives you four relay outputs for on/off or alarm duties plus two voltage-pulse outputs for driving external SSRs — enough to handle a heating/cooling split with alarm annunciation on the same unit.

IP66 front — washdown-ready panel face

The front panel carries an IP66 rating, meaning it's dust-tight and protected against hose-directed water — suitable for food-processing, washdown, or outdoor cabinet installations where the controller face gets sprayed. Panel cutout is rectangular at 92.00mm x 45.00mm, the standard 1/16 DIN footprint, so it retrofits into existing cutouts from other 1/16 DIN controllers without panel rework. Screw-terminal connections on the rear keep wiring straightforward for panel builders; no special crimp tooling needed.

Event input and heater fault detection

An event input lets you switch between two setpoints or trigger a remote hold/run from a PLC dry contact — useful for recipe changeovers without touching the front panel. Heater fault detection monitors current draw on the load side and flags a broken heater or SSR short — a common failure mode in electric furnaces and extruder bands that otherwise runs unnoticed until product drifts out of spec.

Submit an RFQ against your BOM line and we'll source it through our distribution channel.

MPN
E5EC-TQQ4A5M-019