Skip to main content
Omron E5EC-TQX4A5M-010

Omron E5EC-TQX4A5M-010 Temperature Controller

MPN E5EC-TQX4A5M-010
Active

Omron E5EC-T, Process / Temperature Controller, E5EC-TQX4A5M-010, 4 Relay + Voltage (External SSR) outputs, universal input, IP66 front panel.

Dispatch SLA24-48h Global Rush
Quality CheckOriginal Seal & Physical QC
IncotermsDAP / DDP Available
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & stockist· Listing updated Sep 2026

Specifications

E5EC-TQX4A5M-010 specifications
ParameterValue
SeriesE5EC-T
Output signalRelay (4), Voltage (External SSR)
Supply voltage100 to 240VAC
IP ratingIP66
MountingPanel Mount
Temp operating max55 °C
Temp operating min-10 °C
Weight0.463 lb (210.01 g)
PackageBulk
Control methodOn/Off, Proportional (PID)

Product details

Universal input, four relay outputs

The Omron E5EC-TQX4A5M-010 is a panel-mount process and temperature controller from the E5EC-T series. It accepts a wide range of inputs — RTD, thermocouple types B, E, J, K, L, N, PLII, R, S, T, U, W, plus 0–20 mA and 0–10 VDC process signals — so one part number covers most loop types on a machine. Outputs are four relay contacts plus a voltage pulse for driving an external SSR. That gives you three alarm or event outputs plus the main control output, or two stages of heating/cooling with alarms.

The cutout is 92.00 mm × 45.00 mm, the standard 1/4 DIN horizontal format. Screw-terminal connections on the rear; no special tooling needed for installation. The front panel carries an IP66 rating — dust-tight and protected against hose-down. Suitable for food-processing or washdown zones where a standard controller would fail from moisture ingress through the bezel.

Heater fault detection and event input

Built-in heater fault detection monitors the load current via an external CT and flags a broken heater or SSR short before the process drifts out of spec. The event input lets a PLC or limit switch remotely switch the controller between two setpoints or start/stop control.

MPN
E5EC-TQX4A5M-010